Products

Silicone Fiberglass Sleeving

Silicone rubber glass fiber sleeve - (inner fiber and outer rubber)

Silicone Rubber Fiberglass Sleeving(Inside Rubber and Outside Fiber)

Pure Silicone Rubber Tube PSR Series

High Temperature Special Fiberglass Sleeving

PET woven network tube

Home page

Silicone Rubber Fiberglass Sleeving(Inside Rubber and Outside Fiber)

Extruded from silicone rubber into a tube, plus woven glass fiber and then coated with silicone resin high temperature treatment. It is also widely used in H&. N class automotive, shipbuilding, motor, household appliances, electric heating equipment, special lamps and other insulation protection.

Online Inquiry

Category:

Product Center

Keyword: Silicone Fiberglass Sleeving | PET woven network tube

Detailed introduction

Commodity name: Silicone Rubber Fiberglass Sleeving(Inside Rubber and Outside Fiber)

Technical index: self-extinguishing time: 30 seconds

Model/certification number	The test conditions	The combustion resistance	Heat resistance	The average voltage	Individual value
SRS-70 E233803	UL1441	UL VW-1	+200℃-10℃	7000V	6000V

The performance parameters：

project	Performance indicators
Continuous service temperature range	-10℃+200℃
Heat resistance	265℃±2℃ 168＞1/2The original voltage valueThe original voltage value
Thermal aging	260℃、6 hours, no crack
The cold bending	No crack
The level of combustion	<30 seconds
burning(VW-1)	<30 seconds
Stability of hydrolysis	No sticky, no deformation, no softening

Inside diameter size：

project		Wall thickness
Nominal	The tolerance	Wall thickness
1.0－2.5mm	+0.20－0.00mm	0.60±0.05mm
3.0－5.0mm	+0.30－0.00mm	0.70±0.05mm
6.0－7.0mm	+0.35－0.00mm	0.75±0.05mm
8.0－9.0mm	+0.40－0.00mm	0.80±0.05mm
10.0－12.0mm	+0.50－0.00mm	0.90±0.05mm
13.0－25.0mm	+0.65－0.00mm	1.30±0.05mm